Libgphoto2

Download Source:	http://prdownloads.sourceforge.net/gphoto/libgphoto2-2.4.9.1.tar.bz2

---

Introduction to Libgphoto2

Project Homepage: Unknown

Dependencies

Optional

• Pkg-config
• libjpeg
• libexif
• libusb
• libptp2
• resmgr
• Gtk-Doc

Non-Multilib

Compile the package:

sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c &&
./configure --prefix=/usr &&
make

Install the package

make install

Multilib

32Bit

Compile the package:

sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c &&
CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/gphoto2-config{,-32} &&
mv -v /usr/bin/gphoto2-port-config{,-32}

N32

Compile the package:

sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c &&
CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/gphoto2-config{,-n32} &&
mv -v /usr/bin/gphoto2-port-config{,-n32}

64Bit

Compile the package:

sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c &&
CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/gphoto2-config{,-64} &&
mv -v /usr/bin/gphoto2-port-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/gphoto2-config &&
ln -sfv multiarch_wrapper /usr/bin/gphoto2-port-config

Configuring libgphoto2 with libptp2

The following instructions explain how to change permissions to used libgphoto2 with Libptp2 for a no-root user.

Creating the camera Group

groupadd -g 70 camera

and add your user in this group.

Getting informations from your camera

In root, run the following command :

ptpcam --list-devices

You get something like this:

Listing devices...
bus/dev vendorID/prodID device model
2/4     0x040A/0x05BA   C633 Zoom Digital Camera

Creating the udev rule file

With datas give (vendorID/prodID) by the ptpcam command, create the following udev rule file :

cat > /etc/udev/rules.d/92-libgphoto2.rules << "EOF"
# udev rules file for libgphoto2 devices

BUS=="usb", SYSFS{idVendor}=="040a", SYSFS{idProduct}=="05ba", MODE="0660", GROUP="camera"
EOF