CBLFS - User contributions [en]

Libgphoto2

2006-11-25T13:51:04Z

87.167.215.33: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://prdownloads.sourceforge.net/gphoto/libgphoto2-2.2.1.tar.bz2
|}

----

== Dependencies ==

=== Optional ===
* [[Pkg-config]]
* [[libjpeg]]
* [[libexif]]
* [[libusb]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

* if you experience problems during compile about some .h files not found in gphoto, try to run make all-local first

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/gphoto2-config{,-32} &&
mv -v /usr/bin/gphoto2-port-config{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/gphoto2-config{,-n32} &&
mv -v /usr/bin/gphoto2-port-config{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/gphoto2-config{,-64} &&
mv -v /usr/bin/gphoto2-port-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/gphoto2-config &&
ln -sfv multiarch_wrapper /usr/bin/gphoto2-port-config

ALSA Utilities

2006-11-25T13:23:35Z

87.167.215.33: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.13.tar.bz2
|}

----

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with 2 soundcards
you can chose which soundcard is your primary soundcard when adding something like this to modules.conf:

alias snd-card-0 snd-emu10k1

alias snd-card-1 snd-intel8x0

in this case as example for an internal nforce3 soundcard and a soundblaster audigy

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa

ALSA Utilities

2006-11-25T13:23:07Z

87.167.215.33: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.13.tar.bz2
|}

----

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with 2 soundcards
you can chose which soundcard is your primary soundcard when adding something like this to modules.conf

alias snd-card-0 snd-emu10k1
alias snd-card-1 snd-intel8x0

in this case as example for an internal nforce3 soundcard and a soundblaster audigy

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa

ALSA Utilities

2006-11-25T13:22:44Z

87.167.215.33: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.13.tar.bz2
|}

----

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with 2 soundcards
you can chose which soundcard is your primary soundcard when adding something like this to modules.conf

alias snd-card-0 snd-emu10k1

alias snd-card-1 snd-intel8x0

in this case as example for a internal nforce3 soundcard and a soundblaster audigy

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa

ALSA Utilities

2006-11-25T13:22:14Z

87.167.215.33: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.13.tar.bz2
|}

----

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with 2 soundcards
you can chose which soundcard is your primary soundcard when adding something like this to modules.conf
alias snd-card-0 snd-emu10k1
alias snd-card-1 snd-intel8x0

in this case as example for a internal nforce3 soundcard and a soundblaster audigy

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa

ALSA Utilities

2006-11-25T13:21:50Z

87.167.215.33: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.13.tar.bz2
|}

----

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

**** Note for users with 2 soundcards ****
you can chose which soundcard is your primary soundcard when adding something like this to modules.conf
alias snd-card-0 snd-emu10k1
alias snd-card-1 snd-intel8x0

in this case as example for a internal nforce3 soundcard and a soundblaster audigy

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa

ALSA Utilities

2006-11-25T12:48:47Z

87.167.215.33: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.13.tar.bz2
|}

----

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa