CBLFS - User contributions [en]

Xorg7/Utilities

2006-09-18T19:14:53Z

JeremyUtley:

Xorg7/Utilities

2006-09-18T19:13:57Z

JeremyUtley:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.freedesktop.org/pub/xorg/X11R7.0/src/util/
|-
|}

Back to [[Xorg7/Protocol_Headers|Protocol Headers]]

=Utilities=

There are five utilities. Note that the download source, above is the base URL. Each could be downloaded individually, but it is probably easiest to use wget and append either *.bz2 or *.gz to the base URL to pull them all down to your system.

The protocols are, in build order:

* [xorg-cf-files]
* [imake]
* [gccmakedep]
* [lndir]
* [makedepend]

==Dependencies==

There is no build order dependency for the protocols, but they satisfy dependencies for subsequent modules.

==Non-Multilib==

Install each protocol:

./configure XORG_CONFIG &&
make install

==Multilib==

===32Bit===

./configure XORG_CONFIG32 &&
make install

===64Bit===

./configure XORG_CONFIG64 &&
make install

Next install the [[Xorg7/Libraries|Libraries]].

Xorg7/Utilities

2006-09-18T18:55:26Z

JeremyUtley:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.freedesktop.org/pub/xorg/X11R7.0/src/util/
|-
|}

Back to [[Xorg7/utility_macros|Utility Macros]]

=Protocol Headers=

There are thirty-two protocol headers. Note that the download source, above is the base URL. Each could be downloaded individually, but it is probably easiest to use wget and append either *.bz2 or *.gz to the base URL to pull them all down to your system.

The protocols are, alphabetically:

* applewmproto - The AppleWM is the Apple rootless window management extension.
* bigreqsproto
* compositeproto
* damageproto - The damage protocol is used to detect when the screen has been damaged (altered).
* dmxproto - The DMX extension provides support for communication with and control of Xdmx (Distributed Multi-head X server) server.
* evieext - This is the event interception extension protocol.
* fixesproto - This protocol fixes the damage done to the screen.
* fontcacheproto
* fontsproto
* glproto
* inputproto
* kbproto
* printproto
* randrproto - This is the resize, rotate, and reflection protocol.
* recordproto
* renderproto
* resourceproto
* scrnsaverproto
* trapproto - This is the event trapping protocol.
* videoproto
* windowswmproto
* xcmiscproto
* xextproto
* xf86bigfontproto
* xf86dgaproto - Direct graphic access protocol.
* xf86driproto
* xf86miscproto
* xf86rushproto
* xf86vidmodeproto
* xineramaproto
* xproto
* xproxymanagementprotocol

==Dependencies==

There is no build order dependency for the protocols, but they satisfy dependencies for subsequent modules.

==Non-Multilib==

Install each protocol:

./configure XORG_CONFIG &&
make install

==Multilib==

===32Bit===

./configure XORG_CONFIG32 &&
make install

===64Bit===

./configure XORG_CONFIG64 &&
make install

Next install the [[Xorg7/Libraries|Libraries]].

Xorg7/Protocol Headers

2006-09-18T18:27:58Z

JeremyUtley:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.freedesktop.org/pub/xorg/X11R7.0/src/proto/
|-
|}

Back to [[Xorg7/utility_macros|Utility Macros]]

=Protocol Headers=

There are thirty-two protocol headers. Note that the download source, above is the base URL. Each could be downloaded individually, but it is probably easiest to use wget and append either *.bz2 or *.gz to the base URL to pull them all down to your system.

The protocols are, alphabetically:

* applewmproto - The AppleWM is the Apple rootless window management extension.
* bigreqsproto
* compositeproto
* damageproto - The damage protocol is used to detect when the screen has been damaged (altered).
* dmxproto - The DMX extension provides support for communication with and control of Xdmx (Distributed Multi-head X server) server.
* evieext - This is the event interception extension protocol.
* fixesproto - This protocol fixes the damage done to the screen.
* fontcacheproto
* fontsproto
* glproto
* inputproto
* kbproto
* printproto
* randrproto - This is the resize, rotate, and reflection protocol.
* recordproto
* renderproto
* resourceproto
* scrnsaverproto
* trapproto - This is the event trapping protocol.
* videoproto
* windowswmproto
* xcmiscproto
* xextproto
* xf86bigfontproto
* xf86dgaproto - Direct graphic access protocol.
* xf86driproto
* xf86miscproto
* xf86rushproto
* xf86vidmodeproto
* xineramaproto
* xproto
* xproxymanagementprotocol

==Dependencies==

There is no build order dependency for the protocols, but they satisfy dependencies for subsequent modules.

==Non-Multilib==

Install each protocol:

./configure XORG_CONFIG &&
make install

==Multilib==

===32Bit===

./configure XORG_CONFIG32 &&
make install

===64Bit===

./configure XORG_CONFIG64 &&
make install

Next install the [[Xorg7/Libraries|Libraries]].

Pcre

2006-09-18T16:57:56Z

JeremyUtley:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-6.7.tar.bz2
|}

----

== Dependencies ==

== Non-Multilib ==

Configure and compile the package:

./configure --prefix=/usr --enable-utf8 &&
make

Install the package:

make install &&
install -v -m755 -d /usr/share/doc/pcre-6.7/html &&
install -v -m644 doc/html/* /usr/share/doc/pcre-6.7/html &&
install -v -m644 doc/{Tech.Notes,*.txt} /usr/share/doc/pcre-6.7

If you reinstall Grep after installing PCRE, Grep will get linked against PCRE and may cause problems if /usr is a separate mount point. To avoid this, either pass the option --disable-perl-regexp when executing ./configure for Grep or move libpcre to /lib as follows.

mv -v /usr/lib/libpcre.so.* /lib/ &&
ln -v -sf ../../lib/libpcre.so.0 /usr/lib/libpcre.so

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr --enable-utf8 &&
make

Install the package:

make install &&
mv -v /usr/bin/pcre-config{,-32}

If you reinstall Grep after installing PCRE, Grep will get linked against PCRE and may cause problems if /usr is a separate mount point. To avoid this, either pass the option --disable-perl-regexp when executing ./configure for Grep or move libpcre to /lib as follows.

mv -v /usr/lib/libpcre.so.* /lib/ &&
ln -v -sf ../../lib/libpcre.so.0 /usr/lib/libpcre.so

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr --enable-utf8 --libdir=/usr/lib32 &&
make

Install the package:

make install &&
mv -v /usr/bin/pcre-config{,-n32}

If you reinstall Grep after installing PCRE, Grep will get linked against PCRE and may cause problems if /usr is a separate mount point. To avoid this, either pass the option --disable-perl-regexp when executing ./configure for Grep or move libpcre to /lib as follows.

mv -v /usr/lib32/libpcre.so.* /lib32/ &&
ln -v -sf ../../lib32/libpcre.so.0 /usr/lib32/libpcre.so

=== 64Bit ===

Configure and compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr --enable-utf8 --libdir=/usr/lib64 &&
make

Install the package:

make install &&
mv -v /usr/bin/pcre-config{,-64} &&
ln -s multiarch_wrapper /usr/bin/pcre-config &&
install -v -m755 -d /usr/share/doc/pcre-6.7/html &&
install -v -m644 doc/html/* /usr/share/doc/pcre-6.7/html &&
install -v -m644 doc/{Tech.Notes,*.txt} /usr/share/doc/pcre-6.7

If you reinstall Grep after installing PCRE, Grep will get linked against PCRE and may cause problems if /usr is a separate mount point. To avoid this, either pass the option --disable-perl-regexp when executing ./configure for Grep or move libpcre to /lib as follows.

mv -v /usr/lib64/libpcre.so.* /lib64/ &&
ln -v -sf ../../lib64/libpcre.so.0 /usr/lib64/libpcre.so

Bootscripts

2006-09-18T15:53:13Z

JeremyUtley:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Package:
| http://www.linuxfromscratch.org/blfs/downloads/svn/blfs-bootscripts-20060910.tar.bz2
|}

OpenSSL

2006-09-18T08:41:39Z

JeremyUtley:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.openssl.org/source/openssl-0.9.8c.tar.gz
|-
!Download Source:
| ftp://ftp.openssl.org/source/openssl-0.9.8c.tar.gz
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-0.9.8c-fix_manpages-1.patch
|-
!Required Patch (Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-0.9.8c-allow_lib64-1.patch
|-
!Required Patch (x86_64 Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-0.9.8c-32bit_x86_64-1.patch
|-
!Required Patch (MIPS):
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-0.9.8c-mips_support-1.patch
|}

----

== Dependencies ==

=== Optional ===
* [[bc]]

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../openssl-0.9.8c-fix_manpages-1.patch &&
./config --openssldir=/etc/ssl --prefix=/usr shared &&
make MANDIR=/usr/share/man

Install the package

make MANDIR=/usr/share/man install &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-0.9.8c &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
/usr/share/doc/openssl-0.9.8c

== Multilib ==

=== 32Bit ===

Configure the Package (Use the appropriate command):

==== x86_64 ====

patch -Np1 -i ../openssl-0.9.8c-32bit_x86_64-1.patch &&
./Configure linux-x86_64-32 --openssldir=/etc/ssl --prefix=/usr shared

==== Sparc ====

./Configure linux-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Little-Endian) ====

./Configure linux-mipsel --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

make CC="gcc ${BUILD32}" PERL=/usr/bin/perl

Install the package:

make PERL=/usr/bin/perl MANDIR=/usr/share/man install

=== N32 ===

This patch allows OpenSSL to be installed a dir other then lib.

patch -Np1 -i ../openssl-0.9.8c-allow_lib64-1.patch

Configure the Package (Use the appropriate command):

==== Mips (Little-Endian) ====

./Configure linux-mipsel-n32 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips-n32 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

make CC="gcc ${BUILDN32}" PERL=/usr/bin/perl LIBDIR=lib32

Install the package:

make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib32 install

=== 64Bit ===

This patch allows OpenSSL to be installed a dir other then lib.

patch -Np1 -i ../openssl-0.9.8c-allow_lib64-1.patch

Configure the Package (Use the appropriate command):

==== x86_64 ====

./Configure linux-x86_64 --openssldir=/etc/ssl --prefix=/usr shared

==== Sparc ====

./Configure linux64-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Little-Endian) ====

./Configure linux-mips64el --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips64 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

make CC="gcc ${BUILD64}" PERL=/usr/bin/perl LIBDIR=lib64

Install the package:

make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib64 install